[Clfs-support] 64bit clfs with 2.0 pre2 bootscript wont boot//update

[bvl]

On Thursday 04 October 2012 03:14:21 bvl wrote:
> Greetings,
> 
> I have just rejoined this list.  My mail was gummed up at my ISP who went
> to unsupport linux as  result of getting into be with M-u-know-who.
> 
> My problem.:-   I have built the current pure 64-(amd64) bit clfs dev  (my
> system has 3core AMD 64 cpu   and  8 Gbytes RAM).  It will not boot.
> 
> I get the error (of such )
> Checking fileystem
> fsck.ext3 no such file or directory.
> 
>  I have checked  and the fscks are installed in /sbin and I have follwed the
> instructuon sequencies  -coreutils after e2fsprog etc.    And I have rebuilt
> the system after encountering the above error only to run int it again. 
> The only change I made was to add attr and acl at the end and re-installed
> coreutiles.  I have done this successfully before in other clfs builds.
> 
> 
> And another thing. I first erroneously installed bootscript-2.0-pre1 and
> that reffered to  /bin/udev.  I fixed this    leaving the unresolved error
> as mentoned above.  I cleaned out /etc/rc.d/init.d and   all the 
>/etc/rc.d/rcX's.d  and rcsysinit.d and installed bootscript-2.0-pre2.  Now on  
>booting I get  the following error
> 
> "booting Kernel filesystem  ....  devshmpts no such file or directory
> ....please report this bug....
> 
>   it then proceded  to the 'fsck.ext3'   'no such file or directory' error 
reported above.

As an update, I forgot to mention that the host runs lilo and a previous 64-
bit clfs build.  Could booting with lilo be the problem?

sincerely
luxInteg