[Clfs-support] Cannot link libgmp while building mpfr

[Lance Chou]

Hi All,

 

  I'm following the instructions of the CLFS Sysroot. My platform is
ARM. I can build cross-compiler successfully by following the
instructions but failed at IV (Building the CLFS System) while building
mpfr-2.4.1. The problem is that the libtool always link libgmp in a
wrong folder. The error messages are shown as below.

 

libtool: link: arm-linux-uclibcgnueabi-gcc -shared  .libs/exceptions.o
.libs/extract.o .libs/uceil_exp2.o .libs/uceil_log2.o
.libs/ufloor_log2.o .libs/add.o .libs/add1.o .libs/add_ui.o .libs/agm.o
.libs/clear.o .libs/cmp.o .libs/cmp_abs.o .libs/cmp_si.o .libs/cmp_ui.o
.libs/comparisons.o .libs/div_2exp.o .libs/div_2si.o .libs/div_2ui.o
.libs/div.o .libs/div_ui.o .libs/dump.o .libs/eq.o .libs/exp10.o
.libs/exp2.o .libs/exp3.o .libs/exp.o .libs/frac.o .libs/get_d.o
.libs/get_exp.o .libs/get_str.o .libs/init.o .libs/inp_str.o
.libs/isinteger.o .libs/isinf.o .libs/isnan.o .libs/isnum.o
.libs/const_log2.o .libs/log.o .libs/modf.o .libs/mul_2exp.o
.libs/mul_2si.o .libs/mul_2ui.o .libs/mul.o .libs/mul_ui.o .libs/neg.o
.libs/next.o .libs/out_str.o .libs/printf.o .libs/vasprintf.o
.libs/const_pi.o .libs/pow.o .libs/pow_si.o .libs/pow_ui.o
.libs/print_raw.o .libs/print_rnd_mode.o .libs/random2.o .libs/random.o
.libs/reldiff.o .libs/round_prec.o .libs/set.o .libs/setmax.o
.libs/setmin.o .libs/set_d.o .libs/set_dfl_prec.o .libs/set_exp.o
.libs/set_rnd.o .libs/set_f.o .libs/set_prc_raw.o .libs/set_prec.o
.libs/set_q.o .libs/set_si.o .libs/set_str.o .libs/set_str_raw.o
.libs/set_ui.o .libs/set_z.o .libs/sqrt.o .libs/sqrt_ui.o .libs/sub.o
.libs/sub1.o .libs/sub_ui.o .libs/rint.o .libs/ui_div.o .libs/ui_sub.o
.libs/urandomb.o .libs/get_z_exp.o .libs/swap.o .libs/factorial.o
.libs/cosh.o .libs/sinh.o .libs/tanh.o .libs/sinh_cosh.o .libs/acosh.o
.libs/asinh.o .libs/atanh.o .libs/atan.o .libs/cmp2.o .libs/exp_2.o
.libs/asin.o .libs/const_euler.o .libs/cos.o .libs/sin.o .libs/tan.o
.libs/fma.o .libs/fms.o .libs/hypot.o .libs/log1p.o .libs/expm1.o
.libs/log2.o .libs/log10.o .libs/ui_pow.o .libs/ui_pow_ui.o
.libs/minmax.o .libs/dim.o .libs/signbit.o .libs/copysign.o
.libs/setsign.o .libs/gmp_op.o .libs/init2.o .libs/acos.o
.libs/sin_cos.o .libs/set_nan.o .libs/set_inf.o .libs/powerof2.o
.libs/gamma.o .libs/set_ld.o .libs/get_ld.o .libs/cbrt.o
.libs/volatile.o .libs/fits_sshort.o .libs/fits_sint.o
.libs/fits_slong.o .libs/fits_ushort.o .libs/fits_uint.o
.libs/fits_ulong.o .libs/fits_uintmax.o .libs/fits_intmax.o
.libs/get_si.o .libs/get_ui.o .libs/zeta.o .libs/cmp_d.o .libs/erf.o
.libs/inits.o .libs/inits2.o .libs/clears.o .libs/sgn.o .libs/check.o
.libs/sub1sp.o .libs/version.o .libs/mpn_exp.o .libs/mpfr-gmp.o
.libs/mp_clz_tab.o .libs/sum.o .libs/add1sp.o .libs/free_cache.o
.libs/si_op.o .libs/cmp_ld.o .libs/set_ui_2exp.o .libs/set_si_2exp.o
.libs/set_uj.o .libs/set_sj.o .libs/get_sj.o .libs/get_uj.o
.libs/get_z.o .libs/iszero.o .libs/cache.o .libs/sqr.o
.libs/int_ceil_log2.o .libs/isqrt.o .libs/strtofr.o .libs/pow_z.o
.libs/logging.o .libs/mulders.o .libs/get_f.o .libs/round_p.o
.libs/erfc.o .libs/atan2.o .libs/subnormal.o .libs/const_catalan.o
.libs/root.o .libs/sec.o .libs/csc.o .libs/cot.o .libs/eint.o
.libs/sech.o .libs/csch.o .libs/coth.o .libs/round_near_x.o
.libs/constant.o .libs/abort_prec_max.o .libs/stack_interface.o
.libs/lngamma.o .libs/zeta_ui.o .libs/set_d64.o .libs/get_d64.o
.libs/jn.o .libs/yn.o .libs/rem1.o .libs/get_patches.o .libs/add_d.o
.libs/sub_d.o .libs/d_sub.o .libs/mul_d.o .libs/div_d.o .libs/d_div.o
.libs/li2.o .libs/rec_sqrt.o   /usr/lib/libgmp.so    -Wl,-soname
-Wl,libmpfr.so.1 -o .libs/libmpfr.so.1.2.0

/usr/lib/libgmp.so: could not read symbols: File in wrong format

collect2: ld returned 1 exit status

make[2]: *** [libmpfr.la] Error 1

 

  Could anyone help resolve this issue? I really don't know why the
libtool always link to a wrong library even I have already assigned its
location by -with-gmp-lib.

 

Thanks and Best Regards,

Lance

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.clfs.org/pipermail/clfs-support-clfs.org/attachments/20090617/69da3ed4/attachment.html>