[Clfs-support] Uncompressing Linux......

[Binghoo Dang]

Nicholai Vesterløkke 写道:
> Hi
>
> After going through all the steps in the book I only miss to see the 
> system boot :(
>
> I'm using a custom made board based on Cirrus Logic edp9307A, and i 
> have no problems getting the small Cirrus logic distro to run on the 
> board.
>
> During the compile I had problems with the ABI-variable none of the 
> listed worked, soo after reading
> The post [Clfs-support] First try with CLFS embedded for ARM - first 
> comments
>
> >During the buil process I've got the error message that the -m32 which
> >is mentioned in chapter 6.3. ABI Variables is not accepted by the gcc
> >for ARM. Instead of this there are several posibilities - I've coosen:
> >export BUILD="-mabi=aapcs-linux"
>
> I managed to finish the compilation.
>
> But after I moved the system and kernel to the board nothing happens, 
> it doesn't even start with the Uncompressing Linux......
>
> Any ideas?
>
> Regards
> Nicholai
> ------------------------------------------------------------------------
>
> _______________________________________________
> Clfs-support mailing list
> Clfs-support at lists.cross-lfs.org
> http://lists.cross-lfs.org/listinfo.cgi/clfs-support-cross-lfs.org
>   
"Uncompressing Linux......"

Then the problem would be the kernel: kernel configurations, and your 
monitor configurations etc. You may read the book
《Building Embedded Linux Systems》 to find out what's the problem.