[Clfs-dev] (no subject)

[jennifer and kirk terrell]

Hello,

I wanted to check somethings before constructing a patch, which I've attached, so here goes

3.2     Binutils-2.21 is not available. There is a 2.21.1a package that I did not try, I went with 2.22.

    I found that uClibc-0.9.31 and 0.9.32 were not compatible with binutils-2.22.
    

6.4  None is not a good setting for --with-fpu 
    when compiling gcc I get the following error "Unknown fpu used in --with-fpu=none"
    
6.10 If --with-float is soft one shouldn't use --with-fpu

    See 6.4

6.11 uClibc-0.9.33 does not need to be patched for use with binutils-2.22.
        If an additional patch of the config file is not done I get the following error 
        "make: -gcc: Command not found"
        
6.12 If --with-float is soft one shouldn't use --with-fpu

7.4 Add make clean prior to copying the config file. Not required but likely a good practice if one has to restart after a change.

16.1    remove the /sources directory.          

Best regards,
Kirk

____________________________________________________________
NetZero now offers 4G mobile broadband. Sign up now.
http://www.netzero.net/?refcd=NZINTISP0512T4GOUT1
-------------- next part --------------
A non-text attachment was scrubbed...
Name: patch-2013-02-01-05:23
Type: application/octet-stream
Size: 6165 bytes
Desc: patch-2013-02-01-05:23
URL: <http://lists.clfs.org/pipermail/clfs-dev-clfs.org/attachments/20130202/19530c57/attachment-0001.obj>